Chapter 4 Configuration for Windows Vista
AR52 Wireless Lite-N Client Utility (AWCU) is not available for Windows Vista. So after the
Adapter's driver has been installed, we have to use Windows WLAN Autoconfig to establish a
connection. Please follow the steps below.
1.
Right-click the icon
"Connect to a network".
2.
This page will then display and you will see the available wireless network list. Select the
SSID of your Access Point, take test for example. Click Connect.
PW-DN481D
at the bottom of your screen in your system tray and then select
Figure 4-1
Figure 4-2 Select A Network
28
150Mbps Wireless Lite-N PCI-E Adapter