SMC Networks BR21VPN - annexe 1 Manual page 21

Add Remote Management IPs
STEP 1﹒Add the following setting in Permitted IPs of Administration:
(Figure1-3)
Name: Enter master
IP Address: Enter 163.173.56.11
Netmask: Enter 255.255.255.255
Service: Select Ping and HTTP
Click OK
Complete add new permitted IPs (Figure1-4)
To make Permitted IPs be effective, it must cancel the Ping and WebUI selection
in the WebUI of SMC BR21VPN that Administrator enter. (LAN, WAN, or DMZ Interface)
Before canceling the WebUI selection of Interface, must set up the Permitted IPs first,
otherwise, it would cause the situation of cannot enter WebUI by appointed Interface.
Figure1-3 Setting Permitted IPs WebUI
Figure1-4 Complete Add New Permitted IPs
20