Table of Contents
Advertisement
C
OMPLIANCES
Safety Compliance
Warning: Fiber Optic Port Safety
CLASS I
LASER DEVICE
Avertissment: Ports pour fibres optiques - sécurité sur le plan
optique
DISPOSITIF LASER
DE CLASSE I
Warnhinweis: Faseroptikanschlüsse - Optische Sicherheit
LASERGER
DER KLASSE I
Underwriters Laboratories Compliance Statement
Important! Before making connections, make sure you have the correct cord set. Check it (read
the label on the cable) against the following:
Operating Voltage
120 Volts
240 Volts (Europe only)
The unit automatically matches the connected input voltage. Therefore, no additional adjustments
are necessary when connecting it to any input voltage within the range marked on the rear panel.
iv
When using a fiber optic port, never look at the transmit laser while it is
powered on. Also, never look directly at the fiber TX port and fiber
cable ends when they are powered on.
Ne regardez jamais le laser tant qu'il est sous tension. Ne regardez
jamais directement le port TX (Transmission) à fibres optiques et les
embouts de câbles à fibres optiques tant qu'ils sont sous tension.
Niemals ein Übertragungslaser betrachten, während dieses eingeschaltet
ÄT
ist. Niemals direkt auf den Faser-TX-Anschluß und auf die
Faserkabelenden schauen, während diese eingeschaltet sind.
Cord Set Specifications
UL Listed/CSA Certified Cord Set
Minimum 18 AWG
Type SVT or SJT three conductor cord
Maximum length of 15 feet
Parallel blade, grounding type attachment plug
rated 15A, 125V
Cord Set with H05VV-F cord having three con-
ductors with minimum diameter of 0.75 mm
IEC-320 receptacle
Male plug rated 10A, 250V
2
Advertisement
Table of Contents
