ConGuring Your Computer For The Barricade Print Server - SMC Networks 7004ABR Installation Manual

Conguring Your Computer
for the Barricade Print Server
If you are not connecting your printer to your Barricade, skip this
section.
With the Barricade's built-in print server, you can connect your printer
to the Barricade and print from any computer on your network. Each
computer needs to have a "client" installed that will communicate
with the Barricade's print server. Windows 2000 and UNIX and Linux
operating systems have a print client already installed. If you are
running Windows 95, 98, ME, 2000 or NT, you must use the SMC
Barricade Print Server Monitor as your print client.
Conguring Your Computer for the Barricade Print Server for
Windows 95/98/NT/ME/2000
Step 1: Installing SMC Barricade Print Server Monitor
You must rst install the software that will allow your programs to
print to the printer attached to the Barricade.
1. Insert the Installation CD into your
CD-ROM drive.
2. Click "Start" and "Run..."
3. Type "D:\PrintSvr\Setup" and click
"OK."
4. InstallShield will guide you through the
installation process. Click "Next >" for each
window and "Finish" when
complete.
5. Windows must reboot for the changes to take place. When asked if
you want to reboot now, select yes and click "OK."
33