Table of Contents
Advertisement
A
T
BOUT THE
IGER
Power Supply Receptacle
The power receptacle is located on the rear panel of the switch.
The standard power receptacle is for the AC power cord.
Figure 1-8. Power Supply Receptacle
Features and Benefits
Connectivity
N 24 dual-speed ports for easy Fast Ethernet integration and for
protection of your investment in legacy LAN equipment
N Auto-negotiation enables each RJ-45 port to automatically
select the optimum communication mode (half or full duplex)
if this feature is supported by the attached device; otherwise the
port can be configured manually
N Independent RJ-45 10BASE-T/100BASE-TX ports with support
for auto MDI/MDI-X
N Unshielded (UTP) cable supported on all RJ-45 ports: Category
3, 4 or 5 for 10 Mbps connections and Category 5 for 100 Mbps
connections
N IEEE 802.3 Ethernet and 802.3u Fast Ethernet compliance
ensures compatibility with standards-based hubs, network
cards and switches from any vendor
1-10
S
10/100
WITCH
100-240 V
50-60 Hz 2 A
Advertisement
Table of Contents
