Table of Contents
Advertisement
Tagging ( Mac Address based ) VLAN
This method of tagging is defined in the IEEE 802.1Q standard, to
configure switch port by the tagging function that allows the port to
transmit tagging frame. VLAN Tagging can only be used if the
devices at both ends of a link support IEEE 802.1Q.
The following example show you how to create 3 VLAN Groups with
one common tagged port.
MaxSwitch II M
Group 1 VID= 1
Group 2 VID= 2
Group 3 VID= 3
Group 1VID= 1
Connect to Port
1
Connect to Port
802.1Q
VLAN Tag=1
Work-Station A
Work-Station B
First, on Ports page, we set VLAN ID 1, 2, 3 as below. Click the
checkbox of Tagged on Module 1, port 1.( ,which is a Gigabit port )
Remember to click " Apply " button after you finish your setting.
66
Advertisement
Table of Contents
