Default Gateway : The default gateway of the managed unit, can be
modified in IP Config page.
MAC Address : The MAC address of the managed unit, read only.
Firmware Version : The firmware version of the management unit,
read only. You can on-line upgrade the new firmware if the new
version is released.
Note: By default, IE4.0 does not allow Java Applets to open sockets.
The user has to explicitly modify the browser setting to enable Java
Applets to use network ports. ( See Appendix A: for the means to
modify the setting ).
Modules
Modules page shows the modules that have installed into the Modular
1-port Gigabit 1000Base-T Switch
Switch. In the following example,
Module, 1-port Gigabit 1000Base-F ( SX ) Fiber Module, 8-port
auto-sensing 10/100Base-TX Switch Module, and 4-port
100Base-FX (ST) Fiber Module are installed into the Switch.
Figure 5-3 The Modules Page
36