Ip Http Server; Ip Https Port - SMC Networks 2552W-G2 User Manual

6
Command Line Interface

ip http server

This command allows this device to be monitored or configured from a browser. Use
the no form to disable this function.
Syntax
ip http server
no ip http server
Default Setting
Enabled
Command Mode
Global Configuration
Example
Enterprise AP(config)#ip http server
Enterprise AP(config)#
Related Commands
ip http port (6-17)

ip https port

Use this command to specify the UDP port number used for HTTPS/SSL connection
to the access point's Web interface. Use the no form to restore the default port.
Syntax
ip https port <port_number>
no ip https port
port_number – The UDP port used for HTTPS/SSL.
(Range: 80, 1024-65535)
Default Setting
443
Command Mode
Global Configuration
Command Usage
• You cannot configure the HTTP and HTTPS servers to use the same port.
• To avoid using common reserved TCP port numbers below 1024, the
configurable range is restricted to 443 and between 1024 and 65535.
• If you change the HTTPS port number, clients attempting to connect to the
HTTPS server must specify the port number in the URL, in this format:
https://device:port_number
6-18