Step 2: Installing Software - Creative SOUND BLASTER WIRELESS TRANSMITTER User Manual

Step 2: Installing Software

Your audio device is operational without any software installation. However to
enjoy all the features, install the drivers and applications provided on the
installation CD.
NOTE
For all supported Windows OS
1 If prompted for the audio drivers, click the Cancel button.
2 Insert the Installation CD into your CD or DVD drive. Your CD should start
automatically. If it does not, follow the steps below:
i. Click Start -> My Computer.
ii. Right-click the CD or DVD drive icon, and then click Open Autoplay or
Autoplay.
3 If you have downloaded the software, double-click the downloaded .exe file.
4 To complete the installation, follow the instructions on the screen.
5 When prompted, restart your computer.
For Mac OS
1 Insert the Installation CD into your CD or DVD drive.
2 Double-click the <SB_INSTALL> icon.
3 Double-click the <Install> icon.
4 To complete the installation, follow the instructions on the screen.
5 Go to System Preferences, then click the Sound icon. For both the Output and Input
tabs, select SB Wireless.
6 Launch Creative Audio Console from the System Preferences Pane.
You can also download the software from www.creative.com/
support. Simply select your audio device from the list of products
shown on the support page.
Installing Software 4