Setting Up Nomad Jukebox; Step 1: Insert Batteries - Creative NOMAD JUKEBOX C Getting Started

Setting Up NOMAD Jukebox

Your NOMAD Jukebox comes preloaded with songs — you can enjoy playing the songs immediately on your
NOMAD Jukebox whether or not it is connected to a PC. Just follow these steps to listen to the songs immediately:
Step 1: Insert
Insert the rechargeable NiMH batteries according to the placement diagram in the battery compartment.
Batteries
Using alkaline, NiCd, and
other batteries will result in
shorter playback time. The
recharging element of the
Jukebox is not designed to
recharge these batteries.
Completely depleted
batteries should be fully
recharged for twelve hours
when the NOMAD Jukebox
is not in use.
Remember to have one set
of four batteries fully
recharged and ready to
power your NOMAD
Jukebox.
Metal contact clip
Plastic platform for
metal contact clip
2
IMPORTANT
Make sure that the four metal
contact clips are set against
the plastic platform and not
pushed sideways or
downwards when you insert
the batteries.
Use only Creative NiMH
batteries. Follow the
placement diagram in the
battery compartment for
proper installation. Do not
mix batteries of different types
or power (amperage).
Batteries must be charged
fully for 12 hours before initial
use. The minimum time
required for recharging is four
hours while Jukebox is turned
off or ten hours if Jukebox is in
use.
Setting Up NOMAD Jukebox 5