Setting Up Nomad Player; Before Using Your Nomad Player; Charging Batteries - Creative NOMAD User Manual

Setting Up NOMAD Player

Before Using Your
NOMAD Player

Charging Batteries

Never use non-rechargeable
batteries or other types of
rechargeable batteries such as
Ni-Cad or rechargeable alkaline.
Non-rechargeable batteries in
NOMAD Player while it is
connected to the station may
generate excessive heat or battery
leakage that can lead to a risk of
fire.
Before you use your NOMAD Player, be sure the batteries are charged and ready. The rechargeable
batteries included may take as long as 90 minutes to fully recharge.
Charge the batteries included with NOMAD before using the Player.
To charge the batteries:
1. Load the batteries into the Player. If the batteries are
already installed, open the battery compartment and
check the placement of the batteries. The drawing on
the bottom of the battery compartment shows the
correct placement.
2. Place the Player in the docking station. The
docking station locks the Player in position during
recharging.
3. Connect the adapter to the docking station as
shown to the right. The red LED blinks when the
batteries are being charged; it stops blinking when
the batteries are fully charged.
2
+
-
- +
Setting Up NOMAD Player 5