Solving Problems; Beep Codes - Dell Insprion 8100 Setup Manual

Solving Problems

This section provides troubleshooting
information for your computer. If you cannot
solve your problem using the following
guidelines, see "Using Support Tools" on
page 40 or "Contacting Dell" on page 62.

Beep Codes

Your computer might emit a series of beeps
during start‑up if there are errors or problems.
This series of beeps, called a beep code,
identifies a problem. Write down the beep code
and contact Dell (see "Contacting Dell" on
page 62).
Beep Code Possible Problem
One Possible motherboard failure ‑
BIOS ROM checksum failure
Two No RAM detected
NOTE: If you installed or
replaced the memory module,
ensure that the memory module
is seated properly.
Three Possible motherboard failure ‑
Chipset error
Four RAM read/write failure
Five Real Time Clock failure
Six Video card or chip failure
Seven Processor failure
33