Dell Insprion 8100 Setup Manual page 47

c. If you are experiencing memory issues
press <y>, otherwise press <n>. The
following message is displayed:
"Booting Dell Diagnostic
Utility Partition. Press any
key to continue."
d. Press any key to go to the
Option window.
If PSA is not invoked:
Press any key to start the Dell Diagnostics from
the diagnostics utility partition on your hard
drive and go to the Choose An Option window.
4. Select the test you want to run.
5. If a problem is encountered during a test,
a message appears with an error code and
a description of the problem. Write down
the error code and problem description
and contact Dell (see "Contacting Dell" on
page 62).
6.
Choose An
NOTE: The Service Tag for your computer is
displayed at the top of each test screen. If
you contact Dell, technical support will ask
for your Service Tag.
When the tests are complete, close the test
screen to return to the Choose An Option
window.
To exit the Dell Diagnostics and restart the
computer, click Exit.
Using Support Tools
45