Pairing Your Cell Phone And Bluetooth Remote Box; Answering An Incoming Call; Re-Dialling Last Called Number; Ending A Call - VDO CD 1537 X Manual

Pairing your cell phone and
Bluetooth ® remote box
1. Press the VOL+ on the Bluetooth
The LED on the remote box will start flashing
fast, the pairing mode is activated.
Refer to cell phone's user manual to learn
who to put your cell phone into pairing
mode.
The default PIN is 0000
2. After pairing, the LED on the car unit will flash
every 3 or 4 seconds to indicate that the unit
is in call waiting mode for receiving and mak-
ing calls.

Answering an incoming call

1. The ring tone will sound from the car radio
speaker.
2. Short press the TALK button to answer the
call.
3. Now you can talk hands free via the micro-
phone of the Bluetooth
from the car audio speaker instead of your
cellular phone.
During talking, the LED on the Bluetooth
unit light continuously.
4. You can adjust the volume by means of the
VOL+ and VOL- button on the car radio.
5. To receive a call directly on your cell phone,
press the TALK button longer then 3 sec-
onds.

Re-dialling last called number

1. In call waiting mode, press the TALK button
twice, the last called number will be re-di-
alled.

Ending a call

1. Press the TALK button once and the Blue-
®
tooth car unit will return to the call waiting
mode.
State of the LED on the Bluetooth
car unit
State
Pairing
Not connected
Connected
Ringing
Talking
20
®
remote box.
® car unit and listen
®
®
LED Status
flashes fast
Off
Lights every 4 sec. for
2 sec.
Lights continuously
Lights continuously
Note:
The Bluetooth ®
solution integrated into the Bluetooth
and the cell phone to be paired with. The
firmware of the cell phone may vary from re-
gion to region and manufacturer to manufac-
turer.
car
compatibility depends on the
®
car unit