Dell Inspiron PP01X Owner's Manual page 109

To replace the hard drive in the hard drive bay:
Make sure that the work surface is flat and clean to prevent scratching
1
the computer cover.
Save and close any open files, exit any open programs, and shut down
2
the computer (see page 42).
If the computer is docked, undock it.
3
Disconnect the computer from the electrical outlet.
4
Wait 10 to 20 seconds and then disconnect any attached devices.
5
Remove any installed PC Cards, batteries, and devices.
6
Handle components and cards by their edges, and avoid touching pins
and contacts.
Ground yourself by touching a metal connector on the back of the
7
computer, and continue to do so periodically during this procedure.
Turn the computer over. Use a small screwdriver to remove the hard
8
drive screw(s), and place the screw(s) in a safe location.
bottom of computer
NOTICE: When the hard drive is not in the computer, store it in protective
antistatic packaging. See "Protecting Against Electrostatic Discharge" on
page 15.
Lift the hard drive cover until you feel a click.
9
hard drive
screw
A dding and Repl aci ng Part s
HINT: Dell does not
guarantee compatibility
or provide support for
hard drives from sources
other than Dell.
HINT: You need the
Operating System CD to
®
install the Windows
operating system. You
also need the Drivers and
Utilities CD for your
computer to install the
drivers and utilities on the
new hard drive.
109