Dell Inspiron PP01X Owner's Manual page 107

securing
clip
NOTICE: If you need to install memory modules in two connectors, install a
memory module in the connector labeled "JDIM (DIMMA)" before you install
a module in the connector labeled "JDIM2 (DIMMB)."
Ground yourself and install the new memory module:
8
Align the notch in the module with the slot in the center of the
a
connector.
Slide the edge of the module firmly into the connector, and rotate
b
the module down until you feel a click. If you do not feel the click,
remove the module and reinstall it.
Replace the cover and screw(s).
9
NOTICE: I f the m e m or y m o dul e c o ve r is di ffi cul t t o c lo s e,
re m o v e the m o d u l e a n d r e i n s ta l l i t . For c i n g t he c ov e r to cl o se
m ay d am a g e y o u r c om p u t er.
memory
module
A dding and Repl aci ng Part s
HINT: If the memory
module is not installed
properly, the computer
does not boot. No error
message indicates this
failure.
107