Advertisement
Available languages
Available languages
Instruction Manual
GB USA
Age: From 0 Months +
Please read these instructions carefully and keep them for future reference.
This toy requires 2 X "AA" 1.5V type batteries (not included).
WARNINGS
For your child's safety: Warning!
•
Before use remove and dispose of any plastic bags and any other packaging (e.g. fasteners, fixing ties, etc.) and keep them out of reach of children.
•
This toy must only be assembled by an adult.
•
Check the toy regularly for signs of wear and damage and to ensure that it is assembled correctly. Should any part be damaged, do not use and keep out of reach
of children.
•
The toy must always be handled with care; it must not be exposed to direct sunlight, sources of heat and/or kept in damp places; it must not repaired or modified
by the purchaser or unqualified persons.
•
All the opening, closing and adjustment operations of the toy must only be carried out by an adult.
•
Ensure that your child does not sit on the activity table, as it is not designed to support its weight.
•
This toy must be used under adult supervision.
•
Never let your child play unattended in the Baby Trainer.
•
It is dangerous to put the Baby Trainer on an elevated surface, , such as tables, chairs, etc..
•
Age for use in the baby seat position: from birth up to 9 Kg of weight (6 months approximately). Do not use the Baby Trainer in this position when the child is
able to sit on its own.
•
Do not use the Baby Trainer with more than one child at a time.
•
Only place the Baby Trainer on flat, stable surfaces.
•
Always use the safety harness and crotch strap when the child is using the Baby Trainer in the baby seat position. In the other 3 positions, always remove the
safety harness.
•
Warning! Change the Baby Trainer positions when the child is not placed in the product.
•
Warning: Always check that the 2 joints are locked into position (a click will be heard), before letting the child play with the toy.
•
Warning: The Baby Trainer has not been specifically designed for a child to sleep in. If your child needs to rest, it is recommended to lay it in a crib or cot.
•
Always use the waist safety belt and crotch strap when the child is seated in the baby seat position.
In all other positions, to prevent the risk of strangulation, the waist safety belt and crotch strap must be run behind the backrest and secured in a position out of
the child's reach.
INTRODUCTION TO THE TOY
With its adjustable frame, Baby Trainer offers 4 play positions that suit the different phases of the child's growth and allows you to use the toy in the ideal position
for the size of your child's body. The adjustment system of the joints allows you to use Baby Trainer in different play modes:
From birth: in the Gym Mode, baby plays lying on its back on the padded base; in this position, it can touch the 2 rattles attached to the panel and activate lights
and melodies.
From 4 months: the Baby Seat position offers maximum comfort and support to the child, who is entertained by the light effects and music of the electronic panel.
The child can touch the two hanging toys attached to the panel with its feet and activate melodies and light effects.
From 6 months: in the Activity Playmat position, the child plays lying on its tummy and can move its arms to touch the panel activities. This allows the child to
develop the muscles of the neck and back, which it will soon use to crawl on its hands and knees. The side rattle can be positioned on both sides of the Baby Trainer
to help the child develop its motor co-ordination skills symmetrically.
From 9 months: in the Panel Table play mode, the child plays with the electronic panel while sitting on the soft playmat, presses the large central button and turns
the roller and the disk.
HOW TO ASSEMBLE THE GYM
Baby Trainer can be assembled in 4 different positions that allow the child to:
1. Gym mode (From 0 months +) 3-b
2. Baby seat mode (From 4 months up to 6 months) 2-c
3. Activity playmat mode (From 6 months +) 1-a
4. Panel table mode (From 9 months +) 1-c
Assembly in Play Mode No. 1 (3-B)
1.
Place the backrest on the floor, as shown in diag. A.
2.
Place the electronic panel on a flat surface, as shown in diag. B.
3.
Press the side button of the backrest (picture A), and position the white bar in a horizontal position, as shown in diagram C.
4.
Repeat the operation on the other side.
5.
Press the side button of the electronic panel and position the white bar in a horizontal position, as shown in diagram D.
6.
Repeat the operation on the other side.
7.
Join the backrest and panel, as indicated in diagram E.
8.
Turn the frame, as shown in diagram F, and fix the backrest and panel with the 4 screws, as shown in diagram F-1. (Insert 2 screws on each side).
9.
Position the bar located behind the backrest in a horizontal position, as shown in diagram F-2.
10. Turn the frame again, in such a way that the activity panel is facing upwards (diagram G); then place the playmat on top of the frame, as shown in diagram G-1.
11. To fix the playmat to the toy, turn the frame and playmat with the activity panel facing downwards (diagram H).
12. Fix the elastic of the playmat to the bar, near the activity panel, as shown in diagram H-1.
13. Fasten the Velcro strap to the bar, as shown in diagram H-2.
14. Fix the elastic of the playmat to the upper part of the bouncing chair with the 3 plastic inserts (diagram H-3), which must be fitted into the appropriate slots as
shown in diagram H-4.
15. Pass the Velcro strap through the backrest (diagram H-5/H-6); then fasten the Velcro strap as show in diagram H-7.
16. Repeat the operation on both sides.
17. If assembled correctly, the playmat will look as shown in diagram H-8.
18. Turn the gym with the assembled playmat (diagram I).
19. Press both of the backrest side joints at the same time, until the panel reaches position n. 3, as shown in diagram I-1. A "click" will be heard when the joints are
released, indicating that they are fitted in the correct position.
Baby trainer
10
Advertisement
