System Event Log Menu
The System Event Log Menu allows you to view System Event Log (SEL)
messages and to clear the log messages. Press <Enter> to display the System
Event Log Menu. The system counts the log entries and then displays the
total number of records and the most recent message. The SEL retains a
maximum of 512 messages.
To view SEL messages, select View System Event Log and press <Enter>.
Use <Left Arrow> to move to the previous (older) message and
<Right Arrow> to move to the next (newer) message. Enter a record number
to jump to that record. Press <Esc> when you are through viewing SEL
messages.
To clear the SEL, select Clear the System Event Log and press <Enter>.
When you have finished with the SEL menu, press <Esc> to return to the
previous menu.
Exiting the iDRAC6 Configuration Utility
When you have finished making changes to the iDRAC6 configuration, press
the <Esc> key to display the Exit menu.
•
Select Save Changes and Exit and press <Enter> to retain your changes.
If this operation fails, one of the following message is displayed:
–
iDRAC6 Communication Failure — Displayed if iDRAC is not
accessible.
–
Some of the settings cannot be applied — Displayed when few
settings cannot be applied.
•
Select Discard Changes and Exit and press <Enter> to ignore any
changes you made.
•
Select Return to Setup and press <Enter> to return to the iDRAC6
Configuration Utility.
314
Using the iDRAC6 Configuration Utility