Smart Card Logon; System Services Configuration - Dell IDRAC6 User Manual

• Write Protected - Displays whether the vFlash SD card is write-protected
or not.
Health - Displays the overall health of the vFlash SD card. This can be:
•
– OK
– Warning
– Critical
Press <Esc> to exit.

Smart Card Logon

Press <Enter> to select Enabled or Disabled. This option configures the
Smart Card Logon feature. The available options are Enabled, Disabled, and
Enabled with RACADM.
NOTE:
When you select Enabled or Enabled with RACADM, IPMI Over LAN will be
switched off and blocked for editing.

System Services Configuration

System Services
Press <Enter> to select Enabled or Disabled. See the Dell Lifecycle
Controller User Guide available on the Dell Support Website at
support.dell.com/manuals for more information.
NOTE:
Modifying this option will restart the server when you Save and Exit to apply
the new settings.
NOTE:
If you choose to restore to factory defaults, the settings for System Services
does not change.
Cancel System Services
Press <Enter> to select No or Yes.
When you select Yes, all Unified Server Configurator sessions are closed and
the server is restarted when you Save and Exit to apply the new settings.
Using the iDRAC6 Configuration Utility
309