Standard Schema Active Directory Overview - Dell IDRAC6 User Manual

Standard Schema Active Directory Overview

As shown in Figure 7-3, using standard schema for Active Directory
integration requires configuration on both Active Directory and iDRAC6.
Figure 7-3. Configuration of iDRAC with Microsoft Active Directory and
Standard Schema
Configuration on
Configuration on Active
iDRAC Side
Directory Side
Role
Group Name
Role Role
and Domain
Group Definition
Name
User
On the Active Directory side, a standard group object is used as a role group.
A user who has iDRAC6 access will be a member of the role group. To give
this user access to a specific iDRAC6, the role group name and its domain
name need to be configured on the specific iDRAC6. Unlike the extended
schema solution, the role and the privilege level is defined on each iDRAC6,
not in the Active Directory. Up to five role groups can be configured and
defined in each iDRAC. Table 7-9 shows the default role group privileges.
168
Using the iDRAC6 Directory Service