Using Jabra Easygo With Two Mobile Phones - Jabra EASYGO User Manual

Call waiting and placing a call on hold*
- this lets you put a call on hold during a conversation and
answer a waiting call .
- Press the answer/end button once to put the active call on
hold and answer the waiting call .
- Press the answer/end button to switch between the two calls .
- tap the answer/end button to end the active conversation .
HOW tHE StatUSDISPLaY™ WOrKS
Bluetooth®
Indicator
battery
Indicator
to save battery the Jabra StatusDisplay™ is turned off after 3 seconds .
Get an instant status from the Jabra StatusDisplay™ by a tap on any
button on the headset when you are not on a call .
HOW tHE VOICE GUIDanCE WOrKS
When your headset has established a connection to your phone (or
other Bluetooth® device) the voice guidance will say "connected" .
When your headset has less than 30 minutes talk time remaining
the voice guidance will say "low battery" .

USING JABRA EASYGO WITH TWO MOBILE PHONES

Jabra EaSYGO is capable of having two mobile phones (or
Bluetooth® devices) connected to the headset at the same time .
this will give you the freedom of having only one headset to
operate both your mobile phones .
* Phone dependent
Indicates if your headset is connected to your
phone
- Solid light means headset is connected to your
phone
- Flashing light means headset is in 'pairing mode'
and ready to be connected to a new phone
Indicates battery level and if headset is turned ON
- Green light indicates that the headset has more
than 30 minutes of talk time remaining
- red light indicates that the headset has less
than 30 minutes of talk time remaining
Jabra EaSYGO
8