Charge Your Headset; Turning Your Headset On And Off; Pairing It With Your Phone - Jabra BT2080 User Manual

Instruction
tap
Press
Press and hold

CHARGe YoUR HeADset

make sure that your headset is fully charged for two hours before
you start using it . Use the aC power supply to charge from a
power socket . When the battery indicator has a solid red light,
your headset is charging . When the headset is fully charged the
battery indicator turns solid green for five minutes and is then
turned off .
Use only the charger provided in the box - do not use chargers
from any other devices as this may damage your headset .
Please note: the lifetime of the battery will be significantly reduced
if your device is left uncharged for a long period . We therefore
recommend that you recharge your device at least once a month .

tURnInG YoUR HeADset on AnD oFF

to turn on your headset please press the ON/OFF button for
2 seconds until both indicators flash on the Jabra StatusDisplay™ .

PAIRInG It WItH YoUR PHone

Headsets are connected to phones using a procedure called
'pairing' . by following a few simple steps, a phone can be paired
with a headset in a matter of minutes .
1 Put the headset in pairing mode
- When you turn on your Jabra bt2080 for the first time, the
headset will automatically start up on pairing mode – i .e . it is
discoverable for your phone . When the headset is in pairing
mode the bluetooth status indication on the StatusDisplay™ is
flashing .
Duration of press
Press briefly
approx: 1 second
approx: 5 seconds
Jabra bt2080
4