Dell UltraScan P990 User Manual page 189

Class B ITE
MOC Notice (South Korea Only)
Class B Device
Please note that this device has been approved for nonbusiness purposes and may be
used in any environment, including residential areas.
EMI ( B )
Polish Center for Testing and Certification
Notice
The equipment should draw power from a socket with an attached protection circuit (a
three-prong socket). All equipment that works together (computer, monitor, printer, and so
on) should have the same power supply source.
The phasing conductor of the room's electrical installation should have a reserve short-cir-
cuit protection device in the form of a fuse with a nominal value no larger than 16 amperes
(A).
To completely switch off the equipment, the power supply cable must be removed from
the power supply socket, which should be located near the equipment and easily
accessible.
A protection mark "B" confirms that the equipment is in compliance with the protection
usage requirements of standards PN-93/T-42107 and PN-89/E-06251.
Appendix A-7