Continuous Hoop Embroidery - Singer PROFESSIONAL SEW-WARE 2.00A Manual

CONTINUOUS HOOP EMBROIDERY

The PSW 2.00a software provides the capability of digitizing and writing designs
especially for use with the Continuous Hoop Attachment. The design can be
sent to the machine directly or onto a SmartMedia Card that is then taken to the
machine.
NOTE: The same Continuous Hoop Attachment is used on both the
®
Quantum XL-5000 and the Quantum
Singer XL-5000 Continuous 50x120 selection for either machine.
1. Click on File: New>New.
2. Select the Continuous Hoop from the drop down menu in the New dialog
box. Click OK.
3. Click on Library icon; Flowers category; Design 003; click OK.
4. Click top right corner of rectangle which frames the design. Drag and
rotate design 90 degrees.
5. Click right mouse button for pop-up menu; Click on Finish.
6. From Main Menu, left click on Modify>Center Design.
7. From Vertical toolbar; click on the Hoop icon.
8. Click on the Singer XL-5000 Continuous 50x 120: Click OK.
9. From Main Menu, select File: Write using Continuous Embroidery.
NOTE: The option Write using Continuous Embroidery will not be
activated unless Continuous Hoop has been placed on the design.
10. Save Continuous Embroidery box appears.
11. Click SmartMedia Card – Save in New Page or Tag.
NOTE: Saving designs to the SmartMedia Card for the Continuous Hoop
will create pages numbered separately from other pages and identified as
belonging to the Continuous Hoop. Other files on the Card will not
appear, but they are still there. (When going to "Read from Converter", all
pages will appear).
12. Transfer of data is completed; Design Successfully Written; OK.
13. Place SmartMedia Card in Quantum
14. Touch Continuous Hoop icon (bottom right hand corner). Touch
SmartMedia Card icon; touch design and enter.
NOTE: The "V"-shaped placement marker (that is used for placing the
next design in the border) is automatically added by the program.
®
XL-6000, therefore use the same
®
XL-6000. Attach Continuous Hoop.
26