Writing Design To Smart Media Card; Reading Design From Smartmedia Card - Singer PROFESSIONAL SEW-WARE 2.00A Manual

WRITING DESIGN
TO SMART MEDIA CARD
The design is finished. Send it to the SmartMedia Card in the Converter Box.
1. Place SmartMedia card into the right slot of the Converter Box with the
notched corner to the right (brass rectangle facing up).
2. From the Main Menu, click on File: Write to Converter.
3. In the Save Design dialog box, click on the Smart Media card icon.
4. Click on Initialize (Format successful; OK).
It is recommended to initialize the SmartMedia Card the first time using it.
NOTE: Initializing the card will remove everything on the card.
5. Click on Save in New Page.
6. When the data of the design has all been transferred to the Smart Media
Card, the message; Design successfully written appears; click OK.
Attention should be given not to interrupt any copy/read/write procedure of
the PSW Converter. Green light flashing shows data is still being transferred.
Taking the card out before it has finished the procedure could lead to malfunction
of the card. Use the CANCEL button on the Converter to stop the data transfer
and then remove the card.
READING DESIGN
FROM SMARTMEDIA CARD
1. From the Main Menu, click File: Read from Converter.
2. Double click on the SmartMedia card icon, and a list of Pages appears.
3. Double click on a Page; a list of Tags appears (there are 5 Tags in a
Page).
4. The Tags will each display up to 8 designs; double-click on the design.
5. Design is now open and ready for editing.
16