Singer PROFESSIONAL SEW-WARE 2.00A Manual page 25

9. Click OK. The word "WELCOME" now appears on the screen with a box
around it.
10. Resize the word "WELCOME" by typing in the number 400(mm) in the
Height box, found in the Horizontal tool bar; Click Enter.
11. Choose the font style by clicking on the down-arrow beside the Font
Names, found in the Horizontal tool bar; select "Cheltenham Large".
12. Click on the Letter Frame icon, found on the Vertical tool bar. Select the
third letter frame in the second row.
13. From the Horizontal tool bar, click on the down-arrow to change the Stitch
Type. In the Block Properties, change the Satin to Step Satin; click OK.
14. Click the 'inside' top center reference point to enlarge the circle.
NOTE: To move the entire circle, click and drag. To change letter
size, click the 'outside' center reference point.
15. Click the 'inside' right and bottom center reference points to change the
circle frame into an ellipse.
16. To change the position of "WELCOME",
click and drag the reference point at the end
of the word and move it to the bottom of the
inside circle. Click and drag the reference
point at the beginning of the word to the top
of the circle.
NOTE: Where you place your
reference points will determine the
length of your word inside the circle.
17. For ease in splitting the word for Multiple-
hoop, color stops can be added by clicking
the left mouse once on Machine Code icon,
from the Vertical tool bar.
18. When Machine Code dialog box appears.
Click the mouse between the letters E & L.
Click the Stop icon. Click the mouse
between the letters O and M. Click the Stop icon. Click OK.
23