Singer PROFESSIONAL SEW-WARE 2.00A Manual page 27

which your multiple-hoop design will consist. This function allows you to
draw an outline around the areas selected.
2. Notice in the lower left corner - it reads: Input the points. The design is
now ready to be broken down into segments to send to the card.
3. Click the left mouse to 'block out' a section of the design. To begin, click
around the WE.
4. After surrounding the section, click the right mouse.
5. A color box will appear at the top of the screen.
6. Click the left mouse on each color you want to transfer. In this case it
would be the color WE. When selected the color change to black.
7. Move cursor down in hoop area. Click the right mouse to activate the
storing function. Message reads:
PSW
The current selected part of design has been stored. Select next multi-hoop part
or write multi-hoop data to card.
8. Selected parts that became black now turn gray.
9. Repeat steps #32-#38 for all the design sections of the multiple-hoop
layout. The complete multi-hoop layout has become gray (stored to
transfer to card).
10. From the Horizontal tool bar, click the SmartMedia card icon, Write
multiple-hoop data to card.
11. Save Multiple Hoop on SmartMedia (XL-6000) box appears. Click on
the SmartMedia Card icon.
12. Click on the box to the right Save in New Page or Tag. It will now save
the multiple-hoop layout in its entirety to the SmartMedia card - broken
down to a maximum of 8 designs.
13. Message appears: Designs were successfully written; OK.
14. Remove the SmartMedia card from Converter box and place in the Smart
Media slot on the Quantum
the saved parts and they will enter in relation ship to each other as they
were on the computer layout. Stitch out the design, using the Multiple-
hoop function of the sewing machine.
®
XL-6000. Select Multiple Hoop and enter all
25