Inside Hoop; Change Hoop - Singer FUTURA User Manual

Important !
Remember , the FUTURA machine
has to always be turned on, set up for
embroidery and connected to the PC in
order for the FUTURA software to run.
Important !
The software will prompt you with a
warning message in case a design is
bigger than the visual hoop on screen
or if the design is being moved outside
the hoop.

Inside Hoop

Hoop is a feature that offers the opportunity to view your embroi-
dery design on-screen in a "Hoop" that has the dimensions of the
real hoops that are specially designed for the FUTURA embroidery
machine.
The FUTURA machine comes by default with two different size
hoops, the small one at a size of 80x120mm and the large one at a
size of 115x170mm
When running the FUTURA software , it automatically identifies the
hoop that is attached to the machine and displays it on screen.
You can easily choose to change the hoop appearing on screen.

Change Hoop

Use the Hoop feature to view your embroidery design inside the
appropriate size, which is the smallest possible size for the design
based on the hoops provided with the FUTURA machine.
FUTURA software automatically displays the hoop installed on the
machine side, nevertheless in case you would like to switch you
would follow the steps listed below.
Step Action
>1 Select Select Hoop from the
Tools drop-down menu.
>2 Choose between the Small
or Large Hoop for the FU-
TURA machine .
>3 Click Ok.
Result
Hoop dialogue box will
open.
Using FUTURA Software:
Inside Hoop
55