Advertisement
A S S E M B L Y
O F C O M P O N E N T S
G E A R A D J U S T M E N T
» Shift the gears up and down re-
peatedly before setting the shifter
so that the shift cable can settle.
Shift the twist shifter to the
31
3rd gear.
The shift cable must be with-
out play in 3rd gear. That
means it must be pulled out of the
hub as far as it will go.
While pulling the plastic re-
32
tainer (1), it should not be pos-
sible to pull the shift cable further
out of the hub.
– Shift cable has too much play:
Shift the twist shifter to the 1st
gear.
Reduce play of the shift
33
cable by turning the barrel
adjuster (2) at the shifter.
– Shift cable is too taut:
The shifter won't shift into 3rd
gear or the hub doesn't shift in
1st gear or will permanently
switch between 1st and 2nd
gear.
Shift the twist shifter to the 1st
gear.
Decrease shift cable ten-
33
sion by turning the barrel
adjuster (2) at the shifter.
16
31
32
33
2
» Shift the twist shifter to the 3rd
gear and check again, until there
isn't any play in the shift cable.
i-MOTION 3 · June 2006
1
Hide quick links:
Advertisement
