SRAM I-MOTION 3 Manual page 14

A S S E M B L Y
O F C O M P O N E N T S
A S S E M B L Y S H I F T E R
Slide the shifter (1) onto the
24
handlebar.
Slide the handlebar grip (2)
25
onto the handlebar.
Align the shifter on the han-
26
dlebar grip and position the
shifter according to your needs.
Tighten the clamp bolt (3).
2.5 mm Allen wrench, torque 1.7 Nm
(15 in.lbs.).
Never use lubricants or sol-
vents to install handlebar
grips. Handlebar grips provide an
axial safety function and may not
become separated from the hand-
lebar.
» Make sure that the shifter and
brake lever function properly and
are unobstructed (re-adjust if
needed).
» Never ride without the handlebar
grips. The turning grip of the twist
shifter could become loose. This
can result in severe injury.
14
24
25
26
i-MOTION 3 · June 2006
1
2
2.5 mm
3
1.7 Nm
(15 in.lbs.)