Table of Contents
Advertisement
N
Position the vehicle on the side stand on
firm and level ground.
N
Introduce the key (1) in the seat lock.
N
Turn the key (1) anticlockwise, raise and
withdraw the seat (2) from the front.
NOTE
Before lowering and locking the
seat (2), make sure that you have not left
the key in the glove / tool kit compartment.
To lock the seat (2), proceed as follows:
N
Introduce the lower point (3) under the
rear saddle support plate.
N
Position the seat and press it, making
the lock snap.
WARNING
Before leaving, make sure that the seat
(2) is properly locked.
NOTE
The vehicle comes with the
glove/tool kit cover (4) to be used as an al-
ternative to the passenger seat.
For the installation and removal, see be-
side (UNLOCKING / LOCKING THE PAS-
SENGER SEAT).
A useful compartment is available under
the glove / tool kit compartment cover; to
reach it, it is sufficient to release and re-
move the flap (5).
use and maintenance SL mille
27
Advertisement
Table of Contents
