Table of Contents
Advertisement
SETTING THE RED LINE THRESHOLD
(WITH ENGINE OFF ONLY)
When the maximum rpm set is exceed-
ed, the red line warning light LED "
(2) positioned on the dashboard starts
blinking.
If the push button
is pressed for less
than one second, the pointer of the revolu-
tion counter (4) shifts to the red line value
set for 3 seconds, after which it returns to
its initial position.
20
use and maintenance SL mille
For the setting:
N
Press the push button
press it again within 3 seconds.
The pointer (4) moves increasing the val-
"
max
ue by 1000 rpm at each click, as long as
is kept pressed; when it has reached
the maximum value, it starts again from
the beginning.
N
Press the push button
sired rpm value has been set.
N
If the push button
pressed again within 3 seconds, intermit-
tently, the pointer (4) moves increasing
the value by 100 rpm at each click; when
it has reached the maximum value, it
starts again from the beginning.
NOTE
at values lower than 2000 rpm or higher
, release it and
than 12000 rpm.
Never exceed the recommended rpm,
see p. 49 (RUNNING-IN).
N
To confirm, release the push button
until the de-
After 3 seconds, the red line threshold
setting is stored.
is released and then
NOTE
coming on of the red line warning light LED
"
max
It is not possible to set the red line
CAUTION
The setting is confirmed by the
" (2).
.
Advertisement
Table of Contents
