REAR MONO SHOCK ABSORBER
DAMPING ADJUSTMENT
To set compression damping, turn the golden
screw inside the light blue knob.
To set the kick-in threshold for the bypass valve
(high-speed compression damping), turn the light
blue knob.
To set rebound damping, turn the indicated
screw.
WARNING
Do not force the screws beyond their
end stops. Overtightening may
damage the hydraulic sys-tem
(NEGATIVE) SPRING PRELOAD ADJUSTMENT
Loosen the set screw of the spring preload
adjusting ring nut.
Use the supplied adjusting pin to turn the ring nut
until achieving the desired spring preload.
When finished, tighten the set screw.
7