APRILIA RS 125 - 1996 Manual page 27

V BATT (Battery voltage)
M
L
S
rpm the battery voltage, with low beam on, is includ-
ed between 13 and 15 V. The current time appears in
the lower part of the display.
TIME (Setting the hour/minutes)
M
L
S
To change the time data, proceed
as follows:
Press the "L" push button and the
number indicating the hours will
start blinking.
By pressing the "M"
push button for the
second time, the
VBA T
TEXT
battery voltage, ex-
TH2O
TIME
pressed in volt, is
LAP
indicated on the dis-
TIME
play. The recharge
system functions
properly if at 4000
By pressing the "M"
push button for the
third time, the hour
VBA T
TEXT
and minutes are dis-
TH2O
TIME
played.
LAP
TIME
To increase the value, press the
"S" push button.
To set the minutes, press the "M"
push button.
To increase the value, press the
"S" push button.
Now, to store the setting of the hour
and minutes, press the central "L"
push button.
LAP (Stop-watch)
M
L
S
be able to consult them successively.
By pressing the "M"
push button for the
fourth time, the LAP
VBA T
TEXT
function is displayed,
TH2O TH2O
TIME
which makes it pos-
LAP
sible to time each lap
TIME
with the vehicle on
the track and to store
the data in order to
27