Changing The Tail Light Bulb; Replacing The Front And Rear Turn Indicator Bulbs; Replacing The Number Plate Bulb 100 125 180 - APRILIA QUASAR 100 - 2004 Manual

1
2

CHANGING THE TAIL LIGHT BULB

Carefully read page 48 (BULBS)
To change the bulbs:
◆
Loosen the two screws (1) securing the
tail light lens.
◆
Remove the lens (2).
◆
Remove the damaged bulb and fit a new
bulb of equal rating.
CAUTION
Now
lens (2) correctly, match screw holes with
the holes on the tail light support.
REPLACING THE FRONT AND
REAR TURN INDICATOR BULBS
Carefully read page 48 (BULBS)
◆
Use a screwdriver to lever indicator
mount sides and remove the protection
(3).
Pay attention while removin g the
position the
protection or it might damage.
◆
Remove the damaged bulb and fit a new
bulb of equal rating.
CAUTION
correctly fit the protection (3) onto indicator
mount.
3
CAUTION
At reassembly,
4
REPLACING THE NUMBER PLATE
BULB
100 125 180
Carefully read page 48 (BULBS)
To change the bulbs:
◆
Loosen the two screws securing the
number plate light cover (4).
◆
Remove the cover (4).
◆
Remove the damaged bulb and fit a new
bulb of equal rating.
CAUTION
Now
cover (4) correctly, match screw holes with
the holes (5) on the tail light support.
use and maintenance Quasar 50 - 100 - 125 - 180
5
position the
51