APRILIA MANA 850 ABS Manual page 137

Table of Contents

Advertisement

LOW-BEAM LIGHT BULB
Remove the cover (4).
Hold the bulb electric connector,
turn it and take it out.
Disconnect the low-beam light
bulb (6) from the connector.
HIGH-BEAM LIGHT BULB
Remove the cover (4).
Hold the bulb electric connector,
04_32
turn it and take it out.
Disconnect the high-beam light
bulb (5) from the connector.
Install a bulb of the same type adequate-
ly.
CAUTION
INSERT THE BULB IN THE CONNEC-
TOR AND PLACE IT IN ITS FITTING,
MATCHING THEIR FITTING TABS.
04_33
TAIL LIGHT BULBS
Remove the plastic cover (1)
with a screwdriver.
Hold the tail light bulb holder,
pull and take it out of its fitting.
Remove the tail light bulb (2)
and replace it with another of the
same type.
LAMPJE VAN HET DIMLICHT
Verwijder het deksel (4).
Grijp de elektrische connector
van het lampje vast, draai hem,
en verwijder hem.
Koppel het lampje van het dim-
licht (6) los van de connector.
LAMPJE VAN HET GROOT LICHT
Verwijder het deksel (4).
Grijp de elektrische connector
van het lampje vast, draai hem,
en verwijder hem.
Koppel het lampje van het groot
licht (5) los van de connector.
Installeer op correcte wijze een nieuw
lampje van hetzelfde type.
LET OP
PLAATS HET LAMPJE IN DE CON-
NECTOR EN PLAATS HET IN HAAR
ZIT DOOR DE DAARVOOR BESTEM-
DE PLAATSINGSZITTEN TE DOEN
OVEREENKOMEN.
LAMPJES VAN HET POSITIELICHT
Verwijder het dekseltje (1) met
behulp van een schroevendraai-
er.
Grijp de lamphouder van de po-
sitielichten vast, trek er aan, en
verwijder hem uit de zit.
Verwijder het positielampje (2)
en vervang het met één van het-
zelfde type.
137

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Na 850 mana abs

Table of Contents