18
use and maintenance Area 51
The electrical parts work only when the ignition
switch is in position " ".
The lighting system works only when the engine is
running.
1) COLD START LEVER ( )
The starter for the cold start of the engine is operated by rotat-
ing the lever upwards.
To disconnect the cold start, bring the lever to its initial posi-
tion.
2) HORN PUSH BUTTON (
The horn is activated when the push button is pressed.
3) DIRECTION INDICATOR SWITCH (
To indicate the turn to the left, move the switch (A) to the left;
to indicate the turn to the right, move the switch (A) to the
right.
To turn off the direction indicator, press the push button (B).
4) DIMMER SWITCH (
-
With the light switch in position "
ON THE RIGHT SIDE OF THE HANDLEBAR): if the dimmer
switch is in position "
", the low beam is on, while if it is in po-
sition "
", the high beam is on.
)
)
)
", see p. 19 (CONTROLS