APRILIA 6.5 - 1996 Manual page 53

Fig. 62
Proceed as follows:
Extract the rubber bulb socket (1).
Remove the bulb (2) from its seat.
Install a new bulb.
Fig. 63
Read pages 34 (MAINTENANCE) and
51 (BULBS) carefully.
Proceed as follows:
Press the tang (1) with a screwdriver
for small slots.
Remove the protection glass (2).
Press the bulb slightly and rotate it
anticlockwise.
Remove the bulb from its seat.
When reassembling, press the
protection glass exerting a slight
pressure.
Fig. 64
Read pages 34 (MAINTENANCE) and
51 (BULBS) carefully.
Proceed as follows:
Unscrew and extract the screw (2-Fig.
54) on the right side of the headlight.
Rotate the headlight leftwards.
Remove the rubber bulb socket and if
necessary change the bulb (1 bulb
under the speedometer/odometer, 1
under the coolant temperature indica-
tor, 6 under the warning light dash-
board - Fig. 64).
53