Steps To Configure - ZyXEL Communications ZYWALL USG 2000 Support Notes

Encapsulation: Tunnel
Active Protocol: ESP
Encryption: DES
Authentication: SHA1
Perfect Forward Secrecy (PFS): None

1.3.1.1 Steps to configure

Below is step by step configuration:
1) Login ZyWALL USG 2000 GUI and go to Object > Address to create an address object
(local subnet) for remote access.
2) Create another address object for the remote host. The IP Address of the host should be
0.0.0.0, which means that remote user dials in dynamically.
3) Go to VPN > IPSec VPN > VPN Gateway to create gateway for remote a VPN client.
Because this kind of VPN is initialed from remote user, the Secure Gateway should be set as
All contents copyright (c) 2008 ZyXEL Communications Corporation.
Phase2
ZyWALL USG 2000 Support Notes
Phase2
Encapsulation: Tunnel
Active Protocol: ESP
Encryption: DES
Authentication: SHA1
Perfect Forward Secrecy (PFS): None
47