Configuration Procedure - ZyXEL Communications ZYWALL USG 2000 Support Notes

Test

1.3.3.3 Configuration procedure

Network setup
The default ge1 subnet is combined to ge1 and default IP address is 192.168.1.1. Please
connect your NB to ge1 port and ZyWALL USG 2000 will dispatch an IP address. Then we
can start to setup the basic interface setting.
Step 1. Connect your NB at ZyWALL USG 2000's LAN (lan1). Get the IP address by
DHCP and login to ZyWALL USG 2000 by http://192.168.1.1. Configure the
ZyWALL USG 2000's LAN and WAN interface with proper IP address in
ZyWALL> Network > Interface.
Step 2. Create address Object for remote IP assignment. Switch to menu Object > Address
and click Add icon to add new user.
Configure a network range from 8.1.1.33 to 8.1.1.50 for remote IP assignment.
All contents copyright (c) 2008 ZyXEL Communications Corporation.
ZyWALL USG 2000 Support Notes
56