E07. What's The Maximum Vlan Interface Supported By Zywall 1050/Zywall Usg 300 - ZyXEL Communications ZYWALL 1050 Support Notes

ZyWALL 1050/ZyWALL USG 300 Support Notes
down?
The base interface is just a reference which ZyWALL uses to connect to PPP server. If you
have another active interface/routes, ZyWALL will try to maintain connectivity.
E06. What is the port grouping used for in ZyWALL 1050/ZyWALL USG 300?
We can group two or more ports (up to five) together to form up a port grouping. For example,
we group port1 and port2 together and the representative port is port1. The interface binding
on port1 now also can be reached by host connected from port2 but the interface which bind in
port2 previously will non-functional until port2 separate from this group.
Basically, port grouping provides an embedded layer-2 switching capability and each physical
port can only join one port group. Packets transmit inside the port group are forwarded by
hardware switch controller based on the destination MAC address without security checks
(such as firewall, IDP...).
E07. What's the maximum VLAN interface supported by ZyWALL 1050/ZyWALL
USG 300 ?
The maximum VLAN interface supported by ZyWALL 1050/ZyWALL USG 300 and USG
300 is 32.
316
All contents copyright (c) 2007 ZyXEL Communications Corporation.