Table of Contents
Advertisement
RADIUS is an authentication, authorization, and accounting client-server protocol. The client
is a Network Access Server that desires to authenticate its links. The server is a server that
has access to a user database with authentication information.
Wireless LAN Configuration
To allow Wireless Stations to use the Access Point, the Wireless Stations and the Access
Point must use the same settings, as follows:
Mode
SSID (ESSID)
Disable
WEP
WPA
WPA2
WPA-Mixed
802.1x
The mode must be set to Infrastructure.
The network name must match the value used on the Wireless
Router.
Note! The SSID is case- sensitive.
If there is no security is enabled on the Wireless Router, the
security of each station should be disabled as well. And, you can
connect the Wireless Router without security, but it is NOT
recommended.
By default, WEP on the Wireless Router is disabled.
•
If WEP remains disabled on the Wireless Router, all stations must
have WEP disabled.
•
If WEP is enabled on the Wireless Router, each station must use
the same settings as the Wireless Router.
RADIUS Server: RADIUS is an authentication, authorization and
accounting client-server protocol. The client is a Network Access Server
that desires to authenticate its links. The server is a server that has
access to a user database with authentication information. Each station
must set up the RADIUS Server's IP address, port and passwords that
provided by your ISP.
63
Advertisement
Table of Contents
