Table of Contents
Advertisement
Router. Ensure that it is connected and ON. Connect to it and check its
settings. (If you can't connect to it, check the LAN and power connections.)
•
If the Wireless Router is configured correctly, check your Internet connection
(DSL/Cable modem etc) to see that it is working correctly.
Problem 2:
Some applications do not run properly when using the Wireless Router.
Solution 2:
The Wireless Router processes the data passing through it, so it is not
transparent.
Use the Content Filter Settings feature to allow the use of Internet
applications, which do not function correctly.
If this does solve the problem you can use the DMZ function. This should
work with almost every application, but:
•
It is a security risk, since the firewall is disabled.
•
Only one (1) PC can use this feature.
Wireless Access
Problem 1:
My PC can't locate the Wireless Router.
Solution 1:
Check the following:
•
Your PC is set to Infrastructure Mode. (Access Points are always in
Infrastructure Mode)
•
The SSID on your PC and the Wireless Router are the same.
Remember that the SSID is case-sensitive. So, for example "Workgroup" does
NOT match "workgroup."
•
Both your PC and the Wireless Router must have the same setting for security.
The default setting for the Wireless Router security is disabled, so your
wireless station should also have security disabled.
•
If security is enabled on the Wireless Router, your PC must have security
enabled, and the key must be matched.
•
To see if radio interference is causing a problem, see if connection is possible
when close to the Wireless Router.
Remember that the connection range can be as little as 100 feet in poor
environments.
Problem 2:
Wireless connection speed is very slow.
Solution 2:
The wireless system will connect at the highest possible speed, depending
on the distance and the environment. To obtain the highest possible
connection speed, you can experiment with the following:
•
Wireless Router location
Try adjusting the location and orientation of the Wireless Router.
•
Wireless Channel
If interference is the problem, changing to another channel may show a
59
Advertisement
Table of Contents
