ZyXEL Communications NWA3000-N User Manual page 258

Appendix A Log Descriptions
Table 99 User Logs (continued)
LOG MESSAGE
Failed login attempt to
EnterpriseWLAN from %s
(reach the max. number
of simultaneous logon)
User %s has been denied
access from %s
User %s has been denied
access from %s
LDAP/AD: Wrong IP or
Port. IP:%s, Port: %d
Domain-auth fail
Failed to join domain:
Access denied
Table 100 Built-in Services Logs
LOG MESSAGE
User on %u.%u.%u.%u
has been denied access
from %s
HTTPS certificate:%s
does not exist. HTTPS
service will not work.
HTTPS port has been
changed to port %s.
HTTPS port has been
changed to default
port.
HTTP port has changed
to port %s.
HTTP port has changed
to default port.
SSH port has been
changed to port %s.
SSH port has been
changed to default
port.
SSH certificate:%s
does not exist. SSH
service will not work.
258
DESCRIPTION
The device blocked a login because the maximum simultaneous
login capacity for the administrator or access account has already
been reached.
%s: service name
The device blocked a login according to the access control
configuration.
%s: service name
The device blocked a login attempt by the specified user name
because of an invalid user name or password.
2nd %s: service name
LDAP/AD: Wrong IP or Port.Please check the AAA server setting.
Domain-auth fail. Please check the domain-auth related setting.
Failed to join domain: Access denied. Please check the AD server.
DESCRIPTION
HTTP/HTTPS/TELNET/SSH/FTP/SNMP access to the device was
denied.
%u.%u.%u.%u is IP address
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET
An administrator assigned a nonexistent certificate to HTTPS.
%s is certificate name assigned by user
An administrator changed the port number for HTTPS.
%s is port number
An administrator changed the port number for HTTPS back to the
default (443).
An administrator changed the port number for HTTP.
%s is port number assigned by user
An administrator changed the port number for HTTP back to the
default (80).
An administrator changed the port number for SSH.
%s is port number assigned by user
An administrator changed the port number for SSH back to the
default (22).
An administrator assigned a nonexistent certificate to SSH.
%s is certificate name assigned by user
NWA3000-N Series User's Guide