The Configuration Screen - ZyXEL Communications NSA325 User Manual

Chapter 17 Maintenance Screens
The following table describes the labels in this screen.
Table 113 Maintenance > Log > Report Config: Syslog Server Setting
LABEL
Enable Syslog
Server
Server Address
In the table below, check the type of log alerts you want to receive in your e-mail. Select All Log to include all
types of log alerts.
Apply
Cancel

17.5 The Configuration Screen

Click Maintenance > Configuration to open the following screen. Use this screen to backup or
restore the NSA configuration settings.
Figure 192 Maintenance > Configuration
The following table describes the labels in this screen.
Table 114 Maintenance > Configuration
LABEL
Backup Current Configuration Settings
Backup
Restore Configuration
Browse
318
DESCRIPTION
Check this to enable syslog server.
Enter the syslog server address you want the NSA to use for its log alerts.
Click this to save your changes.
Click this to return to the previous screen without saving.
DESCRIPTION
Click this to save the current configuration of the NSA to your computer. A pop-up
screen appears asking you to confirm. Click OK to continue or Cancel to quit.
When you restore a file configuration, the NSA checks the volumes/share paths on
the NSA and the configuration file.
If the volume exists but the share path is missing in the NSA, the NSA automatically
creates this share path.
If the volume does not exist on the NSA, the Status of the share will show "missing
share icon" in Shares screen (see
Click this to locate a previously-saved configuration file.
Table 102 on page 304).
Media Server User's Guide