Create A Sata Volume Button - ZyXEL Communications NSA325 User Manual

Click the
Migrate
2
the RAID 1 volume to be created.

5.7.3 Create a SATA Volume Button

If you do not have an existing volume in the Storage > Volume screen, do the following steps to
create a RAID 1 volume.
In the Storage > Volume screen, click Create a SATA Volume.
1
In the Disk Configuration screen, you can select the storage method.
2
• Type in the Volume Name for your RAID 1 volume. The volume name can be 1 to 31 characters
(a-z, 0-9, " " [spaces], "_", and ".").
• Choose RAID 1 and click Apply.
This deletes all existing data in the eSATA hard disk. Make sure you have
a backup of any existing data in the hard disk.
Media Server User's Guide
button and you can see the following progress bar. Wait for up to 10 minutes for
Chapter 5 Tutorials
77