ZyXEL Communications NSA 210 - QUICK GUIDE V3.0 Quick Start Manual page 13

• Select Get IP automatically from DHCP server if you
have a network device (such as a router or cable
modem) that assigns IP addresses to clients. This
automatically selects Use DNS server from DHCP
server.
• Select Assign IP manually if the clients in your
network have specific address assignments. This
automatically selects Assign DNS server manually.
Enter the details in corresponding fields (IP Address,
Subnet Mask, Default Gateway, Primary DNS
Server and Secondary DNS Server.).
Use the default values if your network administrator
did not provide this information. Click Next.
4. Initialize the hard disk and install the firmware. Click
Browse and point to the location of the file provided
by your administrator or that came with the CD-ROM
drive.
ENGLISH
13