4
If you want to change the default print settings:
a
Press
to access the PictBridge menu.
b
Press the arrow buttons to select the paper size, paper type, photo size, and layout of the photos that you
want to print. Press
Note: The printer will use the default print settings unless you change the print settings from the camera.
5
See the documentation for your camera to begin printing.
Note: If you insert the camera while the printer is performing another job, then wait for the job to finish before
printing from the camera.
Printing photos from a memory device using the proof sheet
1
Load letter- or A4-size plain paper.
2
From the printer control panel, press
3
Insert a memory card or flash drive.
If document files and image files are stored on the memory device, then press
4
Press the up or down arrow button to scroll to Proof Sheet, and then press
5
Press the up or down arrow button to select an option to print a proof sheet.
You can print a proof sheet:
•
For the 20 most recent photos, if there are 20 or more photos on the memory device.
•
For all photos on the memory device.
•
By date, if the photos on the card were taken on different dates. If you choose this option, then press the arrow
buttons to set the start and end dates, and then press
6
Press
.
The proof sheet prints.
7
Follow the instructions on the proof sheet to select which photos to print, the number of copies per photo, red-eye
reduction, page layout, print options, and paper size.
Note: When making selections, make sure to fill in the circles completely.
8
When Scan Proof Sheet appears on the display, press
scanner glass.
Note: If Scan Proof Sheet does not appear on the display, then press the up or down arrow button until it
appears on the display.
9
Press
.
The printer scans the proof sheet.
10
Load photo paper.
Note: Make sure that the paper matches the size that you selected on the proof sheet.
each time you make a selection.
.
Printing
to save your selections.
, and then load the proof sheet facedown on the
41
to select Photos.
.