Mute; Virtual Surround Sound; Treble; Bass - LENCO MDV-5 Instruction Manual

Home cinema set
Hide thumbs Also See for MDV-5:
Table of Contents

Advertisement

4. Basic Setup (cont)
When the channel required is shown use the volume +/- keys on the remote or the
front panel of the amplifier component to adjust the volume of the selected
channel.

4.4 Mute

To mute the audio output press the MUTE (
speakers will be turned off. To restore previous audio output press the mute
button again

4.5 Virtual Surround Sound

When listening to a two channel source press the SURROUND(DSP) button on
the remote control or the front panel to process the source using virtual surround
sound.
When SUR 2.1 is selected sound will be heard from two speakers plus
the subwoofer. When SUR 5.1 is selected sound will be heard from all 5
speakers plus the subwoofer. When virtual surround is enabled SUR 2.1 or
SUR 5.1 will be briefly shown on the display and DSP will be remain in the
display.
When listening to a surround sound source (for example a 5.1 channel
DVD disc) please ensure that this virtual surround sound is turned off otherwise
the sound from the DVD will not be heard correctly.
press the SURROUND(DSP) key to cycle through the virtual surround sound
status as follows:
SUR OFF: Virtual surround sound off
SUR 2.1 : Front Left and front right speakers, Subwoofer output
SUR 5.1 : All 5 speakers plus the subwoofer output

4.6 Treble

To adjust the treble output of the sound use the TREBLE +/- buttons on the front
panel. The positive numbers indicate that the treble output is enhanced and
negative numbers indicate that the treble output is attenuated. For example +10
indicates the treble is fully enhanced and 10 indicates the treble is attenuated to
a maximum.

4.7 Bass

To adjust the bass output of the sound use the BASS +/- buttons on the front
panel. The positive numbers indicate that the bass output is enhanced and
negative numbers indicate that the bass output is attenuated. For example +10
indicates the bass is fully enhanced and 10 indicates the bass is attenuated to a
maximum.

4.8 Default Tone Settings

Press the TONE RESET button on the front panel to return the tone settings to the
default settings. TONE RS will be shown briefly on the display.
) button and the sound from the
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mdv-5 dvd

Table of Contents