Screen Size Selection; To Change Screen Size [Screen Size]; To Adjust Brightness Of Non-Display Area; [Border Intensity] - Eizo FLEXSCAN SX3031W User Manual

Hide thumbs Also See for FLEXSCAN SX3031W:
Table of Contents

Advertisement

2-5 Screen Size Selection

To change screen size [Screen Size]

The image with the resolution other than the recommended resolution is
displayed in full screen automatically. You can change the screen size by using
<Screen Size> from <Others> menu.
Menu
Displays an image in full screen. Images are distorted in
Full Screen
some cases because the vertical rate is not equal to the
(default setting)
horizontal rate.
Displays an image in full screen. In some cases, a blank
Enlarged
horizontal or vertical border appears to equalize the
vertical rate and the horizontal rate.
Displays images with the specified resolution.
Normal
Example: Image size 1280 × 1024 when setting <Single Display> in <Display
Setup>.
Full Screen
(Default setting)
(2560×1600)
[Procedure]
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Screen Size> from the <Others> menu, and press
The screen size setting window appears.
(3) Select "Full Screen," "Enlarged," or "Normal" with
.
The screen size setting is completed.
To adjust brightness of non-display area [Border Intensity]
A border (black area with no image) around the image appears in the "Normal"
or "Enlarged" mode.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Border Intensity> from the <Others> menu, and press
The <Border Intensity> menu appears.
(3) Adjust border intensity with
The border intensity adjustment is completed.
To modify blurred characters/lines [Smoothing]
When a low-resolution image is displayed in the "Full Screen" or "Enlarged"
mode, the characters or lines of the displayed image may be blurred.
(1) Choose <Screen> from the Adjustment menu, and press
(2) Choose <Smoothing> from the <Screen> menu, and press
The <Smoothing> menu appears.
(3) Select a suitable level from 1 to 5 (where 1 = soft and 5 = sharp) with
or
, and press
The smoothing adjustment is completed.
Function
Enlarged
(2000×1600)
(1280×1024)
Border
or
, and press
.
Normal
.
.
or
, and press
.
.
.
.
.
Chapter 2 Settings and Adjustments
Attention
• Smoothing setting may not be required
depending on the display resolution.
(You cannot choose the smoothing
icon.)
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexscan sx3031w-h

Table of Contents